MExcept the temperature range of the chamber, the humidity range of the chamber is the second thing to be considered. Other things to consider would be the temperature change rate, the product in the chamber, the construction, and the type of cooling system (air cooled or water cooled) in the chamber. These will help you determine the best chamber for your application from MENTEK.
220V/380V 50Hz Climatic Test Chamber With Full View Window And Cable Port
MExcept the temperature range of the chamber, the humidity range of the chamber is the second thing to be considered. Other things to consider would be the temperature change rate, the product in the chamber, the construction, and the type of cooling system (air cooled or water cooled) in the chamber. These will help you determine the best chamber for your application from MENTEK.
Technical Specification
| Model | MHP-150 | MHP-225 | MHP-408 | MHP-800 | MHP-1000 | |
| Interior Volume | 150L | 225L | 408L | 800L | 1000L | |
| Interior Dimension(cm) | 50*60H*50 | 50*75H*60 | 60*85H*80 | 100*100H*80 | 100*100H*100 | |
| Exterior Dimension(cm) | 70*150H*165 | 70*165H*170 | 80*175H*180 | 70*190H*185 | 70*190H*195 | |
| Net Weight | 250kg | 300kg | 400kg | 600kg | 700kg | |
| Temp & Humidity Range | -70℃,-60℃,-40℃,-20℃,0℃～+150℃ | 10％～98％RH(Optional) | ||||
| Temp & Humidity Fluctuation | ±0.3℃～±0.5℃ | ±2.5％RH | ||||
| Temp & Humidity Deviation | ±0.5℃～±2℃ | ±3％RH(＞75％RH);±5％RH(≤75％RH) | ||||
| Temp Change Rate | 2℃～2.5℃/m heat-up | 1℃/m cool-down | ||||
| Standard configurations | 1 Window, 1 Cable port, 1 Lamp, 4 Casters, 1 Power cable, 2 Stainless steel shelves | |||||
| Standard Documentations | quality certification,test report ,user operaion manual for machine & controller | |||||
| Safety devices | Electric leakage, fan overheat ,anti-dry ,compressor overheat & overpressure,power supply undercurrent,overheat, overcurrent, phase sequence, over-temperature protection devices | |||||
Why Select MENTEK?
Looking for distributors worldwild.
Viewing Window With Manually Controlled Wiper Blowing Sand and Dust Testing Chamber are ideally designed for the simulation of Dust and Sand conditions in a controlled atmosphere. Blowing sand chambers are used in particular for evaluating the effects of dust-laden environments based on the below standards. Blowing Dust chambers are widely used in several industries and applications such as for Military & Defense, Automotive, Computer Systems, Optics and Displays, Material, Coatings, Solar Energy, etc.
MENTEK has been active in this field since the 1990s in cooperation with the most important and expert companies operating in defense (explosive materials) and automotive (gasoline) fields. Chambers in explosion proof configuration are utilized in the types of tests where it is necessary to check the correct operation of specimen that can explode during the test.
The reasom why requiring compact equipment is that Limited laboratory space and the necessity of installing testing systems directly at the workspace . Temperature testing chambers of this series comprising two independent testing zones provides an innovative approach to fulfil the requirement at all points, which can dramatically improve the space crowded situation of many testing laboratory and increase the use flexibility in limited space.
The simulation of natural sunlight is achieved by using several different methods based on the area of the spectrum it is required to test, in order to check the damage caused by the differing solar radiations. The main applications are the accelerated aging of the equipment under the effects of the radiation combined with other environmental phenomena such as temperature, humidity, rain, corrosion and so on. Several kinds of lamps can be used:
• Metal halide lamps able to cover the whole spectrum of the sun’s radiation
• Ultraviolet lamps to test the equipment against damage due to UV rays
It is mainly to simulate sandstorm weather caused damage to lockset, auto parts(such as car lamp, instrument, electrical dust cover, steering system door lock, etc.), seals, electrical instruments and other products.The dust test chamber can effectively help users to evaluate the sand and dust resistance of the sample
IPX3, IPX4, IPX5,IPX6,IPX7 IPX8 Protection Rain Test Chamber is designed to certify a product’s resistance to the intrusion and or ingress by foreign objects as defined by BS EN 60529:1992. It certifies a product’s resistance to intrusion by foreign objects and water and is signified by the IP testing coding IPXX. The IP protection chamber meet the standard such as IEC 60034-5/ 2006, IEC 60529/ 2001-02, IEC 60598-1/ 2008-01 and IEC 60947-1/ 1999-02.
Test Chamber with 5 to 15℃/m Rapid Temperature Change Rate are a good choice for cycle test of high & low temperature . Built with the highest quality and reliability, this Climate chamber is capable of meeting the most stringent testing demands of various international standards such as ISO,IEC, MIL, ASTM,DIN, etc. Test Chamber are widely used in electronic, LED lighting industry, auto parts, chemical industry, building materials, mobile computers, batteries, plastic, metal, rubber etc.material.
Large Viewing Window With Interior Lighting Temperature and Humidity Test Chamber is a custom tailored Single Zone Chamber in the purpose for easy observating samples during environmental testing. MENTEK has Over 49 different models let you choose size, configuration and performance to suit many types of environmental test conditions to perform cold resistance test, thermal cycling test, ultra low temperature test, high temperature test, storage condition, and calibration function test.
