A thermal cyling chamber is a test method of rapid-rate temperature change chamber used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. A rapid-rate temperature change chamber is widely used in metal, plastic, rubber, electronics, and other materials, and it can be used as an important reference for improving product quality.

ESS Thermal Cycling Chamber, full name Environmental Stress Screening Thermal Cycling Chamber, are available From 5 to 20°C/min Rapid-Rate Temperature Change. It can be used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction causedby chemical change or physical harm.

This temperature test chamber is a good choice for material structure testing or composites in the environment of a continuous high temperature or ultralow temperature. It is ideally suitable for the electronic, LED lighting industry, auto parts, chemical industry, building materials, mobile computers, batteries, plastic, metal, and other materials. Under conditions of high and materials of high and low temperature change, various performance and reliability indexes of related product spare parts and materials can be used as the basis of improving the product or reference.

MSUN series xenon-arc weathering test chamber 

Scope of application: It is intended for test of color fastness to light, to weathering and to perspiration and light, and light aging test of such materials as textile, paint, dye, coating, plastics, wood floor and paper. It has rain sprinkling, revolution, rotation, spray and other weathering test functions.

Thermal cycling (damp heat) test chamber is made of casing,inner wall,and thermal insulating material. The cooling system is combined by cooling mode and cooler. 

Three Zone Thermal Shock Chamber means the chamber consist of high temperature zone, low temperature zone, and testing zone. The test sample is in static mode. While Two Zone Thermal Shock Chamber consist of high temperature zone, low temperature zone only. And the test sample is moving up and down along with the built in air-controlled hanging basket.

This kind of thermal shock testing chamber Using PID+PWM principle VRF technology, so It can save energy effectively, and the refrigerating case is  made of wavy special muffler sponge. It selects the high quality nickel chromium alloy heater, and It also has normal temperature recovery function and can safely take out the sample after the test.

Applications:L series vibration test system is ideal for screening test of small electronic components, automotive parts, portable equipment, plug-in elements, etc.
The design of L series vibration test system complies with MIL, ASTM, IEC, ISO, BS, JIS and other military standards as well as other international test standards.
L series vibration test system is fitted with large-diameter moving coil and high-strength guide to facilitate the configuration of various additional tables for testing of various test specimens and acquisition of excellent vibration transfer ratio.
L series vibration test system can easily realize small component test requirements, including transportation simulation test, vibration-climate integrated test and earthquake simulation test.

The machine applies to tensile, peeling, tear and other tests of materials and products in such industries as textile, rubber, plastics, synthetic leather, tape, plastic film, electronics and metals, in order to determine the product quality.

Applications: The machine is mainly used for tensile, compression, bend and other mechanical tests, analysis and study of metal and non-metal materials. It can automatically obtain such parameters as ReH, ReL, Rp0.2, Fm, Rt0.5, Rt0.6, Rt0.65, Rt0.7, Rm and E and conduct test and provide data according to GB, ISO, DIN, ASTM, JIS and other international standards.

Thermal shock tester is combined by fan, heater, cooling system and controller. the accessories contain Shelf x2; lead hole x1 (optional); recorder (optional)