MSUN series xenon-arc weathering test chamber
Scope of application: It is intended for test of color fastness to light, to weathering and to perspiration and light, and light aging test of such materials as textile, paint, dye, coating, plastics, wood floor and paper. It has rain sprinkling, revolution, rotation, spray and other weathering test functions.
Three Zone Thermal Shock Chamber means the chamber consist of high temperature zone, low temperature zone, and testing zone. The test sample is in static mode. While Two Zone Thermal Shock Chamber consist of high temperature zone, low temperature zone only. And the test sample is moving up and down along with the built in air-controlled hanging basket.
Applications:L series vibration test system is ideal for screening test of small electronic components, automotive parts, portable equipment, plug-in elements, etc.
The design of L series vibration test system complies with MIL, ASTM, IEC, ISO, BS, JIS and other military standards as well as other international test standards.
L series vibration test system is fitted with large-diameter moving coil and high-strength guide to facilitate the configuration of various additional tables for testing of various test specimens and acquisition of excellent vibration transfer ratio.
L series vibration test system can easily realize small component test requirements, including transportation simulation test, vibration-climate integrated test and earthquake simulation test.
Applications:The product applies to the evaluation of casing IP grade of electrical and electronic equipment and checks waterproof performance of the casing by testing hazardous impact of water entering the casing.
The systems of this machine are system air circulation mode, cooling mode, cooler, refrigerant, condensation mode, heater, humidifier, water supply mode.</span>
The equipment, by driving sand and dust of certain concentration flowing over the surface of the test specimens at a certain flow rate with high-power fan, evaluates resistance to dust particle penetration, resistance to sand abrasion or blockage, storage capacity and operability of the test specimens (equipment) exposed to dry sand or dusty atmosphere and also simulates the dust environment of low concentration and low wind speed.
Applications:The equipment is intended for product reliability and performance evaluation by simulating the products in high altitude and low air pressure environment.
Two box the product is a hot and cold impact test equipment, it used the French original TFT touch screen, can reduce the error on the basis of convenient operation, two box of cold and hot shock equipment to shorten the recovery time of sample, three box greatly reduced compared with the experimental zone moves on the vibration of the specimen, and have good temperature uniformity, can easily used to measure samples and applied voltage cable wiring.
Mini Temperature Chamber is ideally designed for environmental test in lab application,it is available as standard products in a variety of sizes to suit your needs. MENTEK environmental test chambers are often used for steady-state stability testing, basic temperature cycling and accelerated stress testing. In keeping with the needs of today's lab, we designed these temperature and humidity test chambers to have a compact exterior that maximizes the interior workspace.And we also can be customized for every sizes,bigger or smaller.
This product adopts the fluorescent ultraviolet lamp which can best simulate the UV spectrum of sunlight, and combines with the device of temperature control and moisture supply to simulate the discoloration, brightness and intensity reduction of the material.Cracking, peeling, pulverization, such as oxidation damage of sunlight (UV) factors such as high temperature, high humidity and condensation, dark cycle, at the same time by ultraviolet light and moisture resistance of the synergy between makes the material single light ability or single wet ability weakened or failure, thus light points is applied to the material weather, to evaluate the performance of equipment has to provide the best sunlight UV simulation, make the maintenance cost is low, easy to use, the equipment adopts programmable control automatic operation test period, high degree of automation, light stability is good, the test results with high recurrence rate, etc
This product is a large capacity high temperature industrial grade oven, it adopts advanced energy saving design, noise reduction and fire resistant technology, can ensure the safety of colleagues in quiet and efficient work.My company has twenty years experience specializing in the production of test chamber, we have a professional team, from design, purchase materials, installation and debugging the delivery until independently by our team, so we can control the delivery date, to a certain extent, and after the equipment when use malfunctioned, we can effectively find a solution.If our standard products can meet your needs, we can arrange 7-10 days' delivery. If you have special needs, we can make it for you