This advanced thermal damp heat test equipment simulates extreme temperature (-70°C to +150°C) and humidity (20%-98% RH) conditions for testing product durability. Ideal for electronics, automotive, and aerospace industries, ensuring reliability under harsh environments. Features precise controls, stainless steel construction, and compliance with IEC/MIL standards.
This equipment is applicable to reliability tests simulating environmental conditions such as high and low temperature constant, gradual change, sudden change or damp heat tests for various electrical products, other products, components and materials. The high and low temperature and damp heat test chamber of Mentek is designed and manufactured in accordance with the national standards GB/T10586-2006 and T10592-2008.
The equipment meets the following test standards:
GB/T2423.1-2008 Test A: Low Temperature
GB/T2423.2-2008 Test B: High Temperature (Partially)
GB/T2423.3-2006 Test Cab: Constant Damp Heat
GB/T2423.4-2008 Test Db: Changeable Damp Heat
GB/T2423.34-2012 Test Z/AD: Combined Temperature and Humidity Test or Other Temperature and Humidity Tests within the Performance Range of the Equipment.
Main Parameters
| M-series vibration testing system | |||
| Technical parameters of 1-ton vibration table body | |||
| Sinusoidal thrust | 1000kgf | N*M Allowable partial load moment | >390 |
| Random thrust | 1000kgf | Equivalent mass of moving parts | 10kg |
| (6ms) Impact thrust | 2000kgf | Load connection point | 17 |
| Frequency range | DC-4000Hz | Countertop screw size (standard) | M10 |
| Continuous displacement | 51mm | Tablet screw layout (diameter, circumference) | 8*100mm; 8*200mm |
| Impact displacement | 51mm | Axial vibration isolation frequency | <3Hz |
| Maximum speed | 2m/s | Maximum load | 300kg |
| Maximum acceleration | 981m/s | Magnetic flux leakage | ≤1mT |
| Moving circle diameter | 240mm | (L*W*H) Size (no packaging) | 1061*750*844mm |
| First order resonant frequency | 3600Hz | Shaking table weight (no package) | 960kg |
| Technical parameters of power amplifier | Technical parameters of fan | ||
| Maximum output power | 15KVA | Fan power | 4kW |
| Signal to noise ratio | >65dB | Air volume | 0.38m/s |
| Rated output voltage | 120Vrms | Wind pressure | 0.048kgf/cm |
| Amplifier efficiency | >92% | Duct diameter | 125mm |
| System protection | Featuring multiple performance protections | (L*W*H) Size (no packaging) | 590*764*1280mm |
| (L*W*H) Size (no packaging) | 550*800*2070mm | Weight (no packaging) | 150kg |
| Amplifier weight (without packaging) | 420kg | ||
| System working environment requirements | Purchase configuration | ||
| Temperature | 0-40ºC | Sliding table | Vertical expansion of the table |
| Humidity | 0-90% | Mobile device | Insulation board |
| Power requirements | 3 phase AC, 380V±10%, 50Hz, 26KVA | Power amplifier remote control | Fixture |
| Compressed air requirements | 0.6MPa | ||
This environmental testing equipment simulates extreme temperature (-70°C to +150°C) and low-pressure (0.1–100 kPa) conditions for evaluating product durability in aerospace, electronics, and battery industries. Features rapid thermal cycling, precise pressure control, and compliance with MIL-STD-810, JIS, and IEC standards to accelerate reliability validation.
This ultraviolet weathering test equipment evaluates material durability by simulating accelerated UV exposure, temperature (up to 70°C), and humidity conditions. Ideal for automotive, coatings, plastics, and textiles, it ensures product longevity against sunlight degradation. Features UVA-340/UVB-313 lamps, precision controls, and compliance with ASTM G154/ISO 4892 standards.
This advanced environmental test equipment simulates extreme temperature (-70°C to +150°C) and humidity (10%-98% RH) conditions, ideal for multi-sample damp heat testing in electronics, automotive, and aerospace. Features multi-layer design, precise controls, rapid cycling, and compliance with IEC 60068, MIL-STD, and ISO 16750 standards.
This precision thermal testing equipment evaluates product resilience under extreme temperatures (up to +200°C), ensuring reliability for electronics, automotive, and aerospace components. Features rapid heating, uniform temperature distribution, safety protections, and compliance with IEC 60068/MIL-STD-810 standards.
This environmental test equipment evaluates dust-proof (IP5X/IP6X) and sand resistance for automotive, aerospace, and electronics components. Simulates harsh conditions with adjustable particle density, airflow (up to 20 m/s), and temperature (-40°C to +80°C), ensuring compliance with IEC 60529, MIL-STD-810, and ISO 20653 standards.
This xenon-arc weathering tester simulates sunlight, rain, and humidity to evaluate material durability and colorfastness. Features adjustable irradiance (0.3–1.5 W/m²), temperature (25°C–100°C), and cycle modes, ensuring compliance with ASTM G155, ISO 4892, and SAE J2527 for automotive, textiles, and coatings industries.
This vibration-temperature-humidity test chamber combines multi-axis vibration (5–3000 Hz, up to 100g), extreme temperatures (-70°C to +150°C), and humidity (10%–98% RH) to simulate harsh conditions. Ideal for aerospace, automotive, and electronics, it ensures product reliability with programmable cycles and compliance with ISTA, MIL-STD-810, and IEC 60068 standards.
