High Temperature Industry Drying Ovens are are available in various sizes and temperature ranges from 200°C to 350°C, including standard model and custom made oven. There are ideally suitable for high temperature drying, paint drying, drying glass and plastics, ink, and removing moisture, wood drying and high temperature tests. Widely used in aerospace, automotive, electronics, metalworking.
Technical Sheet
| Model | MHG-72 | MHG-125 | MHG-270 | MHG-600 | MHG-1000 | ||
| Interior Dimensions(cm) | 45*40*40 | 50*50H*50 | 60*90H*50 | 100*100H*60 | 100*100H*100 | ||
| Exterior Dimensions(cm) | 65*115H*140 | 70*125H*160 | 800*165H*160 | 125*185H*175 | 125*180H*175 | ||
| Power supply | AC1∮220V60/50Hz | AC3∮380V60/50Hz | |||||
| Power(k.w.) | 5 | 6 | 9 | 12 | 12 | ||
| Temperature | RT﹢10℃~250℃ | ||||||
|
Controller precision | ±0.5℃ | |||||
| Temp uniformity | ± 1.5 ° C below 100 ° C and 2.5 ° C above 100 ° C | ||||||
| Resolution accuracy | 0.1℃ | ||||||
| Heating time | 60min | ||||||
| Material | Shell | High - strength cold - rolled steel plate double - sided powder baking | |||||
| Inner wall | SUS#201 Stainless steel 2B panel | ||||||
| Insulation Materials | Glass fiber cotton | ||||||
| System | Circulation fan | Longer sleeves, high temperature and high efficiency motor + centrifugal fan | |||||
| Heater | Electric wire wire accelerator | ||||||
| Control method | PID control + SSR | ||||||
Product Details
Forced Air Circulation is used in Industrial Lab Oven for High Precision Temperature Uniformity. Hot air industrial lab oven is used to test materials performance in high temperature test condition. It is widely applied to circuit boards, electronic component, photoelectric device, electroplating metal, plastic chemical industry,printing industry, processing coating, ceramic glass and transformer, inductance coil, motor coil baking,drying,aging, etc.
Hot air drying oven can provide a stable test space for pre-heating, drying, changes about physics and chemistry testing.It controls the temperature through the connection of digital display instrument and temperature sensor, and adopts the method of hot air circulating air supply. The shell is welded with high quality steel plate and the surface is treated by baking varnish. The inner chamber is made of mirror stainless steel #304.
This equipment is suitable for all kinds of electrical and electronic products and for testing the safety performance of batteries in furnace heat test, heating test, etc
Lab testing application of pre-heating, drying, changes about physics and chemistry testing requires the Lab drying oven, it often comes in small sizes because the limited room and space. And dring oven often adopts hot air circulation system ,which is composed of low noise, high temperature resistant motor and special air duct design.
Digital Electronic Control Double Door High Temperature Industry Drying Ovens are are available in various sizes and temperature ranges from 200°C to 350°C, including standard model and custom made oven. There are ideally suitable for high temperature drying, paint drying, drying glass and plastics, ink, and removing moisture, wood drying and high temperature tests. Widely used in aerospace, automotive, electronics, metalworking.
High Precision Temperature Ovens are avalible in standard model, and we also can custom made as per customer requred size and temperature ranges from Rt to 200°C to 350°C or higher. The mentioned below oven is specially designed For Stanley Electric Japan. As you can see it has 4 sub-chambers inside and each one are around 102L.
Forced Air Circulation is used in Industrial Lab Heating and Drying Oven for High Precision Temperature Uniformity. Lab Heating and Drying Oven is used to test materials performance in high temperature test condition. It is widely applied to circuit boards, electronic component, photoelectric device, electroplating metal, plastic chemical industry,printing industry, processing coating, ceramic glass and transformer, inductance coil, motor coil baking,drying,aging, etc.
