Applications:The product applies to the evaluation of casing IP grade of electrical and electronic equipment and checks waterproof performance of the casing by testing hazardous impact of water entering the casing.
Service conditions
1. Ambient temperature: 5°C ~ +30°C
2. There shall be no high-concentration dust, corrosive gases or flammable and explosive atmosphere around it.
3. Voltage: AC220V±10%; frequency: 50Hz±5%
4. The ambient temperature shall be ≤28°C in order to ensure normal operation indicators.
Major technical parameters of waterproof test chamber
|
Model |
MSRT-X1 |
MSRT-X2 |
MSRT-X3 |
MSRT-X4 |
MSRT-X5 |
MSRT-X6 |
MSRT-X7 |
MSRT-X8 |
|
D*W*H(cm) Work chamber dimensions D*W*H (cm) |
100*100*100
80*80*80
|
100*100*100
80*80*80
|
100*100*100
80*80*80
|
100*100*150 |
||||
|
Water hole diameter |
0.4mm |
0.4mm |
0.63mm |
12.5mm |
|
|||
|
Hole spacing |
20mm |
50mm |
50mm |
|
|
|||
|
Water flow |
1L/min |
I.1L/min |
1.8L/min |
12.5±0.626L/min |
100±5L/min |
|
||
|
Rainfall volume |
1mm/min |
3mm/min |
0-10L/min (adjustable) |
|
|
|||
|
Technical indicators |
Rainfall area: 500mm*500mm |
1. Hole number: IP*3: 16; IPX4: 25; 2. Swing pipe specification: R400mm\R600mm 3. Water pipe diameter: 16mm 19mm 4. Spray ring radius: R400mm 5. Swing pipe amplitude: stepless adjustable 6. Swing pipe ID: 15mm 7. Test table speed: 1~7rpm (stepless speed regulation) 8. Test table diameter: 400mm 9. Rainwater pressure: 80~100kpa 10. IPX3——120°; each swing (2*120°) requires approx. 4s 11. IPX4——360°; each swing (2*360°) requires approx. 12s 12. Swing pipe amplitude: ±45°C, ±60°C, ±90°C |
1. Spray water pressure: 30~100kpa 2. Spray angle: arbitrarily adjustable 3. Rotary table: 400mm 4. Rotary table speed: 1-5rpm 5. Tilt angle: 15° 6. Distance between nozzle and tested product: 2.5m~3m |
1. Water level indicator: 1000mm; transparent 2. Aluminum ladder: 1000mm high*600mm wide |
1. Pressure range: 0~0.7MPa; adjustable 2. Water pipe diameter: 3/4 |
|||
|
Cabinet construction |
1. Body material: industrial aluminum alloy; 2. Enclosure: 304# stainless steel plate; 3. Motor: imported Panasonic variable speed motor; 4. Water tank lifting guide rail: formed guide rail and rubber pulley and roller |
|||||||
|
Power (kW) |
1-2 |
2-3 |
2-3 |
1-2 |
||||
|
Supply voltage |
AC220V 50HZ |
|||||||
Blowing Sand and Dust Environmental Test Chamber are ideally designed for the simulation of Dust and Sand conditions in a controlled atmosphere. Blowing sand chambers are used in particular for evaluating the effects of dust-laden environments based on the below standards. Blowing Dust chambers are widely used in several industries and applications such as for Military & Defense, Automotive, Computer Systems, Optics and Displays, Material, Coatings, Solar Energy, etc.
Dual Chambers Environmental Test Machine is a kind of Stacked Type test chambers which are specially designed for conducting two or three different experiment at once.Two or three chambers can be merged into a single unit.Independent temperature and humidity control of each chamber using microprocessor PID. Ideally Designed to offer an ideal and cost-effective solution for laboratories with limited space and budget.
Safety, performance and convenience is the top three points that are concerned by our customers and end users. Floor Standing Temp. & Humid. Chambers With Casters for Easy Mobility During Installation or Relocation is one kind of easy convenience.However, MENTEK Highly Interactive LCD Controller featured Temp. & Humidity. Testing Chambers bring a good user experiences when operating the test machine.
Ozone chamber simulation and strengthening the atmosphere of ozone conditions, the study of the role of ozone on the rubber, rapid identification and evaluation of rubber anti-ozone aging performance and anti-ozone agent Protective effect of the method, and then take effective anti-aging measures to improve the life of rubber products.
Xenon test chamber provides precise control of critical test parameters including spectrum, irradiance, relative humidity, chamber temperature and black standard temperature.It is ideally designed for the selection of new materials, the improvement of existing materials or evaluating the changes in product formulation that affect product durability. This is an ideal instrument for total accelerated light stability and weathering testing; And can be used to test for light stability quickly.
Touch Screen Controller Staniless-Steel Environmental Sand Dust Test Chamber is mainly to simulate sandstorm weather caused damage to lockset, auto parts(such as car lamp, instrument, electrical dust cover, steering system door lock, etc.), seals, electrical instruments and other products.The dust test chamber can effectively help users to evaluate the sand and dust resistance of the samples.
Mentek Provide you the best possbile Stability test chamber with With Standard Size or Custom Design, in easy operation whether AC220V·50HZ/380V·50HZ or AC220V·60HZ/380V·60HZ internationally. 12 to 36 Month Long Warranty and plug-
Climatic Chamber is also called environmental chamber that as a good choice for cycle test of high & low temperature and humidity testing. Built with the highest quality and reliability, this Climate chamber is capable of meeting the most stringent testing demands of various international standards such as ISO,IEC, MIL, ASTM,DIN, etc. Test Chamber are widely used in electronic, LED lighting industry, auto parts, chemical industry, building materials, mobile computers, batteries, plastic, metal, rubber etc.material.
