Thermal Cycling Test Chamber

Thermal cycling (damp heat) test chamber is made of casing,inner wall,and thermal insulating material. The cooling system is combined by cooling mode and cooler.

Detail

Product Info

Video

Inquiry Form

Thermal Cycling Test Chamber

Thermal cycling (damp heat) test chamber technical parameters

Model		MESS-250	MESS-500	MESS-1000	MESS-1500
Performance parameters	Temperature range	-40~+150°C (change range: -20~+80°C): -70~+150°C (change range: -55~+80°C)
	Temperature fluctuation	±0.3°C±0.5°C
	Temperature deviation	±1°C±2°C
	Humidity deviation	±3%RH（<75%RH） ±5%RH（≦75%RH）
	Heating/cooling rate	5/10/15/20°C/min
	Standard load	5kg aluminum ingot	12kg aluminum ingot	25kg aluminum ingot	30kg aluminum ingot
Construction	Casing	High-strength cold-rolled steel plate, with double sides powder painted and backed
	Inner wall	sus#304 stainless steel 2B panel
	Thermal insulating material	Glass fiber + polyurethane foam
Cooling system	Cooling mode	Single-stage mechanical cooling/cascade double-stage compressor cooling mode
	Cooler	Imported compressor
Heater		Nichrome strip heater
Inspection window (mm)		300*400
Test port (mm)		1 on the left; 50		1 on the right; 100
Temperature sensor		Platinum resistor pt100
Controller		Japan imported original 7” TFT touch screen
Recorder		Built-in paperless recorder (external printer can be connected)
Computer interface		UCB port online operation
Internal dimensions (cm)	Width	70	80	100	100
	Height	70	90	100	150
	Depth	50	70	100	100
Motor cover height		190	210	220	210
Power supply		AV380V 50Hz three-phase four-wire system + ground wire
Standard configuration		Product instruction manual x1; test report x1; certificate of conformity and quality certificate x1; partition board one copy respectively; silicone rubber plug x1 set
Configuration standard		GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2 GJB1500.3\GJB15.0

Technologies

1. Hardware equipment of the company: 1 set of Germany imported laser machine, 1 set of Japan AMADA AIRS-255NT punching machine, over 10 sets of various German carbon dioxide and argon welding machines, and Autodrsk inventor 3D graphics software for 3D sheet metal disassembly drawing and virtual assembly design.

2. The casing is made with quality galvanized steel sheets and electrostatic powder coated and baked.

3. The inner chamber is made of imported sus#304 stainless steel and fully argon arc welded to prevent leakage or penetration of hot and humid air; the round corner design of inner tube of the inner chamber facilitates drainage of condensate water along side wall.

2. The casing is made with quality galvanized steel sheets and electrostatic powder coated and baked.

* From

* Message

Tips on getting accurate quotes from suppliers. Please include the following in your inquiry:
1. Personal or business information
2. Provide product request in great detail
3. Inquiry for MOQ, Unit Price, etc

Company

Full Name

Telephone

Fax

Website

Country

* Verification Code

Please enter a correct verification code.

Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.

Thermal Cycling Test Chamber

Thermal Cycling Test Chamber

Thermal Cycling Test Chamber

Thermal cycling (damp heat) test chamber technical parameters

Technologies

Releted Product

Aging test chamber

Salt Mist Test Chamber

Thermal Cycling Test Chamber

50/60Hz Environmental Test Chamber Air Cooling 5-15°C / Minute High Efficiency