Two Zone Thermal Shock Chamber For BYD Auto Parts Testing SUS 304 Interior
Product Presentation
Thermal shock causes cracking or faulting along lines of stress as a result from the conflict between uneven element expansion and compression according to relative temperature. Industries such as consumer, medical, automotive, aerospace and construction use thermal shock chamber testing to ensure the reliability of their products.
Two Zone Thermal Shock Chamber For BYD Auto Parts Testing SUS 304 Interior
Thermal shock causes cracking or faulting along lines of stress as a result from the conflict between uneven element expansion and compression according to relative temperature. Industries such as consumer, medical, automotive, aerospace and construction use thermal shock chamber testing to ensure the reliability of their products.
Two Zone:Hot and Cold zone
Automatic Motorized Lift Up and Down Mechanism
Application
- Electronic parts
- Home appliance
- Auto parts
- Aviation parts
- LED lights
- Plastics
- Metals
Technical Sheet For Three Zone Thermal Shock Chamber
| Model | MTS-50 | MTS-100 | MTS-150 | MTS-200 | MTS-300 | |
| Interior Volume | 50L | 100L | 150L | 200L | 300L | |
| Interior Dimension(cm) | 35*40H*35 | 50*40H*50 | 60*50H*50 | 65*50H*62 | 90*50H*67 | |
| Temp Change Rate(with load) | 5℃ ～20℃/m(Standard); 30/℃/m( Liquid Netrogen) | |||||
| Hot/Low Temp Range(Testing Zone) | +60℃～+150℃ | -10℃～-65℃ | ||||
| Hot/ Low Temp Range(Preheat-precool Zone) | +60℃～+200℃ (Pre heating zone) | 0℃～-78℃ (Pre cooling zone) | ||||
| Preheating Time(m) | RT to 150℃ | RT to 150℃ | RT to 150℃ | RT to 150℃ | RT to 150℃ | |
| 30 | 40 | 40 | 40 | 40 | ||
| Precooling Time(m) | -40, -55℃, -65℃ | -40, -55℃, -65℃ | -40, -55℃, -65℃ | -40, -55℃, -65℃ | -40, -55℃, -65℃ | |
| 70,80,90 | 70,80,90 | 70,80,90 | 70,80,90 | 70,80,90 | ||
| Power | (KW) | 20,21,22 | 21,22,23 | 22,23,25 | 28,35,45 | 30,40,50 |
| Temp Fluctuation | ±0.5℃ | |||||
| Temp Conversion Time | ≤10 seconds | |||||
| Temp Recovery Time | ≤5min | |||||
| Temp & Humidity Deviation | ±1℃～±2℃ | ±3％RH(＞75％RH);±5％RH(≤75％RH) (optional) | ||||
| Standard configurations | 1 Window, 1 Cable port, 1 Lamp, 4 Casters, 1 Power cable, 2 Stainless steel shelves | |||||
| Standard Documentations | quality certification,test report ,user operaion manual for machine & controller | |||||
| Safety devices | Electric leakage, fan overheat ,anti-dry ,compressor overheat & overpressure,power supply undercurrent,overheat, overcurrent, phase sequence, over-temperature protection devices | |||||
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
Releted Product
Aging test chamber
MSUN series xenon-arc weathering test chamber Scope of application: It is intended for test of color fastness t...
Salt Mist Test Chamber
Applications ●Salt mist test chamber is intended for corrosion resistance test of products made of various mate...
Thermal Cycling Test Chamber
Thermal cycling (damp heat) test chamber is made of casing,inner wall,and thermal insulating material. The cooling syste...
50/60Hz Environmental Test Chamber Air Cooling 5-15°C / Minute High Efficiency
Product Presentation Three Zone Thermal Shock Chamber means the chamber consist of high temperature zone, low tempera...