MENTEK provides you various environmental test chambers with advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test. Moreover, Convenience is also a focus point for our end users. Thus we have Floor Standing Temp. & Humid. Chambers With Casters for Easy Mobility During Installation or Relocation.

The simulation of natural sunlight is achieved by using several different methods based on the area of the spectrum it is required to test, in order to check the damage caused by the differing solar radiations. The main applications are the accelerated aging of the equipment under the effects of the radiation combined with other environmental phenomena such as temperature, humidity, rain, corrosion and so on. Several kinds of lamps can be used:

• Metal halide lamps able to cover the whole spectrum of the sun’s radiation

• Ultraviolet lamps to test the equipment against damage due to UV rays

Two-Zone Thermal Shock Chamber consist of high temperature zone, low temperature zone. The test sample is in static mode. While Two Zone Thermal Shock Chamber consist of high temperature zone, low temperature zone only. And the test sample is moving up and down along with the built in air-controlled hanging basket.

It is mainly to simulate sandstorm weather caused damage to lockset, auto parts(such as car lamp, instrument, electrical dust cover, steering system door lock, etc.), seals, electrical instruments and other products.The dust test chamber can effectively help users to evaluate the sand and dust resistance of the sample

This equipment is widely used in environmental simulation reliability tests such as high and low temperature constant and gradual change of materials and materials, materials and materials, and sudden or damp heat tests. MENTEK constant temperature and humidity test chamber is designed and manufactured according to national GB/T10586-2006 and GB/T10592-2008.

IPX3, IPX4, IPX5,IPX6,IPX7 IPX8 Protection Rain Test Chamber is designed to certify a product’s resistance to the intrusion and or ingress by foreign objects as defined by BS EN 60529:1992. It certifies a product’s resistance to intrusion by foreign objects and water and is signified by the IP testing coding IPXX. The IP protection chamber meet the standard such as IEC 60034-5/ 2006, IEC 60529/ 2001-02, IEC 60598-1/ 2008-01 and IEC 60947-1/ 1999-02.

Rapid-Rate Temperature Change Chamber  in Mentek are available From 5 to 15°C/min Temperature Change Rates.Standard Tests volumes from 100 liters to 1000 liters and Temperatures from -70°C to +150°C.The test chamber can pre-record test programs, so that customers can start test only click program numbers. Standard and custom models meet different requirements. 

Test Chamber with 5 to 15℃/m Rapid Temperature Change Rate are a good choice for cycle test of high & low temperature . Built with the highest quality and reliability, this Climate chamber is capable of meeting the most stringent testing demands of various international standards such as ISO,IEC, MIL, ASTM,DIN, etc. Test Chamber are widely used in electronic, LED lighting industry, auto parts, chemical industry, building materials, mobile computers, batteries, plastic, metal, rubber etc.material.

Large Viewing Window With Interior Lighting Temperature and Humidity Test Chamber is a custom tailored Single Zone Chamber in the purpose for easy observating samples during environmental testing. MENTEK has Over 49 different models let you choose size, configuration and performance to suit many types of environmental test conditions to perform cold resistance test, thermal cycling test, ultra low temperature test, high temperature test, storage condition, and calibration function test.

Rapid-Rate Temperature Change Chamber  in Mentek are available From 5 to 15°C/min Temperature Change Rates.Standard Tests volumes from 100 liters to 1000 liters and Temperatures from -70°C to +150°C.The test chamber can pre-record test programs, so that customers can start test only click program numbers. Standard and custom models meet different requirements. 

Thermal Cycling Test Chamber is a powerful testing method for environmental stress screening.It can effectively eliminate product early failing. MENTEK Air Cooling 5 to 15 °C / minute Rapid - rate Thermal Cycle Chamber can simulate impact on product caused by climate condition change during working and evaluate reliability and durability of a product.  

MExcept the temperature range of the chamber, the humidity range of the chamber is the second thing to be considered. Other things to consider would be the temperature change rate, the product in the chamber, the construction, and the type of cooling system (air cooled or water cooled) in the chamber. These will help you determine the best chamber for your application from MENTEK.